Environmental Application Solutions

AIR QUALITY ISSUE

01

Smelters, pulp mills, paper mills, chemical plants and other industries will produce a large number of corrosive and even toxic air pollutants during the production.

02

In urban environment, the combustion of fossil fuel in transportation will release various amounts of acid oxidizing and corrosive air pollutants.

03

The industries of chemicals, fertilizers, pharmaceuticals, food processing and other industries will release a large number of irritating odors and corrosive pollutants during the manufacturing.

04

The laboratory, hospital and others will produce a large number of irritating odor, bacteria and other pollutants.

05

A large number of air pollutants such as acid, alkali and dust will be produced during the production process of coal-fired power generation and petrochemical industry.

06

In coastal areas, a large number of corrosive pollutants with high salinity will be produced during the sea water transpiration.

07

In wastewater treatment and solid waste disposal plants, a large variety of oensive odours and peculiar smells as well as corrosive gases will be produced due to fermentation, chemical addition or combustion process.

08

In museums and archives, the protection and storage of cultural relics and archives data will be seriously affected by various acid, oxidizing and corrosive gases introduced from outside and released from inside.

AIR POLLUTION IMPACT

Museums and archives

Outdoor air pollutants, entering the reservoir area following the fresh air system, will have a long-term corrosive impact on various cultural relics, ancient books and archival data. In the process of cultural relics protection, all kinds of silk fabrics and ancient books data need to be treated with acid discharge regularly. If the acid gas released is not treated, it will cause secondary pollution to the environment in the storage area.

Museums and archives

Outdoor air pollutants, entering the reservoir area following the fresh air system, will have a long-term corrosive impact on various cultural relics, ancient books and archival data. In the process of cultural relics protection, all kinds of silk fabrics and ancient books data need to be treated with acid discharge regularly. If the acid gas released is not treated, it will cause secondary pollution to the environment in the storage area.

Laboratories

The excrement from experimental animals will produce serious and peculiar odours; and all kinds of reagents used will produce a large number of highly concentrated chemical pollutants. These pollutants, if discharged directly without treatment, will cause serious impact on the surrounding environment.

Semiconductor field

The processing of various chips, panels and electronic components requires a very clean environment. If the outdoor air pollution, entering the room following the fresh air, is not treated, it will seriously affect the production quality and lead to a decline in the product yield.

Data center and control room

IT servers, storage equipment, network equipment, automatic control equipment, etc. are very sensitive to various acidic, alkaline and salt pollutants in the air. If not handled, it will lead to serious corrosion of electronic equipment, causing shutdown and even business interruption.

Pharmaceutical manufacturing

The production of all kinds of drugs and medical devices has a very high requirement for environmental cleanliness. Outdoor air pollutants will lead to a decline in cleanliness, thus aecting productiont quality.

Household life field

Frequent haze entering the room through doors and windows will seriously impact human health if it cannot be eectively purified. Ordinary activated carbon materials can only purify air through physical adsorption, with short service life and low eiciency, if they cannot be replaced in time and eectively, it will also cause secondary release of pollutants and further deteriorate air quality.

Automobile manufacturing

The engine bench test will produce a high concentration of acid gas emissions. Spraying lines will produce a large amount of volatile gases and irritating odors. If it is discharged without treatment, it will seriously aect the surrounding environment of the plant.

AQI STANDARD

Office and living environment standards:

GB/T18883-2002,GB3095-2012

Data center industry standards:

ISA-71.04-2013,ASHRAE-TC9.9,GB50174-2017

Electronic industry standards:

GB/T4798.3-2007

Museums and archives standards:

JGJ66-2015, JGJ25-2010, GB3095-2012, iso11799-2015

Petroleum and petrochemical industry standards:

GB/31571-2015

CA SOLUTIONS

Traditional Solutions

  1. Physical adsorption principle/process reversibility
  2. High temperature and oscillating environment are easy to cause secondary release
  3. Hazardous waste after use/need special treatment
  4. Only small molecular weight volatile gases can be filtered
  5. Without relevant certification/use safety cannot be guaranteed
  6. The limited adsorption capacity and unpredicted service life

CA Solutions

  1. Chemical reaction mode/process is irreversible
  2. Up to dozens of professional formulas / no secondary release
  3. Neutral substances are generated after the reaction andcan be treatedas general waste
  4. It can filter acidic, alkaline, corrosive, volatile, peculiar smell and other gases
  5. Having passed many international safety certifications, it is safe and harmless to human body and environment
  6. The service life can be accurately calculated through colorimetry and sampling inspection